Learn the secret to floor cleaning services and floor waxing services everything from tiles to wood, plus expert advice on carpet cleaning. It’s the final task on your long cleaning list – you’ve dusted, tidied, vacuumed, and polished, and all that’s left is to make the floor shine.
If only it were that simple!
Not all floors need the same treatment, and if you get it wrong, you could do more harm than good. From laminate to carpet, here’s everything you need to know to keep your floors looking shiny.
How do I keep my floors clean for longer?
We all know how quickly dirt, dust, and grime accumulate. Prevention is better than cure. Use the doormats at the entrance, take off your shoes, and ask guests to do the same. Remove any splashes immediately, especially on porous surfaces such as marble. Besides that? Unfortunately, you just have to keep cleaning!
What is the best way to clean the floors?
Carefully consider the surface you are cleaning before doing any damage. Once you know what material you are dealing with, you can follow our handy guide below:
Clean with a damp mop – do not use soap-based cleaners, as they can leave a dull film on the floor, and avoid excess wetness. Don’t even use polishing wax – it will make the floor too slippery.
To remove marks and stains, use a diluted solution of water and vinegar. Never be tempted to use abrasive cleaners, such as nylon pads or steel wool, as they can scratch the laminate.
Stubborn marks, such as shoe polish, can be removed with a nail polish remover containing acetone or other mild solvents. The trusty old WD-40 is also effective.
To protect the floor, the place felt pads under the furniture legs and drip trays under the plant pots.
TIP: Vacuum or sweep all types of hard floors regularly to prevent the surface from being scratched by sand and remove shoes from the front door.
Ceramic and quarry tiles
Hurray, these require minimal maintenance! Sweep and wash with a mild detergent solution, before rinsing with clean water. Never use polishing wax: the tiles will become slippery.
You could also try a steam cleaner. “Steam cleaners are a quick and effective option for cleaning sealed floors and tiles, and they only need water to get the job done.
For the first year after laying, the cotton matures. Most flooring suppliers offer a special cleaner, sealer, and polish, so use the products recommended by your suppliers.
Sweep with a soft brush or vacuum cleaner, then wipe with a damp cloth, using a mild detergent. Rinse thoroughly after cleaning. To remove abrasion marks, use a cloth dipped in clean dish soap or white spirit, then rinse.
Sealed floors only need to be swept and wet-dried. Do not use too much water or the wood may swell and crack.
Unsealed and waxed floors should be swept regularly and occasionally re-polished. Use the wax sparingly, as any excess will leave a sticky residue and attract dirt and shine well. In case of worn stains on the surface, apply a non-slip floor polish.
On a waxed floor, glaze and dirt build up over time. The only way to clean it is to remove the wax and start over. Use a cloth moistened with white spirit. Let it soak and when the wax and dirt begin to dissolve, wipe it off with a crumpled newspaper. Scrub stubborn parts by hand or with scouring pads on a floor polisher. Once all the polish has been removed, wipe it off with clean water. Let it dry completely before applying the new polish, one small section at a time.
Clean the factory sealed cork tiles with a damp broom, using a solution of dish soap. For an extra layer of protection, especially in high traffic areas like the bathroom and kitchen, apply an acrylic or polyurethane sealant.
Never wet cork floors excessively and be careful not to damage the seals or protective coatings by dragging appliances or furniture over them.
Sweep or vacuum to remove sand and dust. Clean with a broom or cloth moistened with a floor cleaner or cleaning solution. Use water sparingly. Rinse after washing.
The stone is susceptible to stains, so it should always be protected with a resin sealant. To clean the sealed stone, vacuum it thoroughly before wiping it with a mild cleaning solution.
To remove grease or oil, use a proprietary stain remover for the stone stain treatment.
If you own a professional carpet cleaning machine, this is the best way to clean the floor. If not, you can still do a good job without it.
Start by treating the stains. Use a carpet stain remover for stain removal. Simply use it according to the manufacturer’s instructions, but remember it’s always best to target the spots quickly. The longer you let the stains in the fabric dry, the harder it will be to remove them.
Next, you’ll want to tackle the carpet with your vacuum cleaner. Once you’ve done this once, use the vacuum cleaner accessories to clean hard-to-reach areas. Use the crevice tool to vacuum the edges of the carpet and under the radiators – this will help prevent black lines from forming around the baseboard. If your carpet is particularly thick, use the turbo brush (or electric brush) to pick up stubborn dirt and pet hair.
Everyone loves a clean floor, right? We may all have different methods of cleaning our floors, but finding the right combination of products and tools is magical and makes the floor cleaning job a little more enjoyable.
Before cleaning the floors, I always start with dry dusting or vacuuming to get rid of crumbs and dirt. If you have pets or a lot of dust, you may want to continue with a quick sweep using a microfiber duster.
Solid wood floors:
Before using any cleaner, make sure your hardwood floors are sealed. How to clean your hardwood floors doesn’t always depend on the type of wood but rather on the finish that is on them. If you are unsure of the type of finish on your floors, check with the manufacturer.
I prefer to use a refillable or microfiber mop than a steam mop on my hardwood floors. While many people love the ease of a steam mop, my personal preference is to play it safe and use a gentler, less damp approach with a damp microfiber cloth – just use a spray floor cleaner and spray and dry. . I also use a refillable spray mop with a microfiber pad.
Unfinished or bamboo floors
If you have hardwood, waxed, or bamboo floors, the best approach is to use a slightly damp (with water) microfiber cloth. Always check the manufacturer’s instructions first.
If you are using a microfiber swab, moisten it before starting and rinse often while scrubbing the floors. Also, if you have streaks with a steam mop and frequently rinsing the mop head doesn’t solve the problem, you may need to use distilled water (available by gallon at your local grocery store or drugstore). And if you have plain water, the minerals in your water could be contributing to streaks and residue on your floors.
Are you ready to enjoy your newly renovated property now! For more info visit our website, Martinez Cleaning LLC. You must take advantage of our incredible cleaning services.