Annoying are the moments when you sit down on a relaxed chair, switch your Windows PC, connect to Wi-Fi successfully, but there is no trace of internet connection. The yellow triangle over the internet connection icon leaves you up in arms. This situation is manageable when it only happens for a few seconds. However, if your Windows computer is habitual of such experiences, then you surely need to do something. Well, you are reading the right blog, as it will tell you all the quick fixes you can try in just eight simple steps. Follow as directed.
Why Do You See Such Errors
Whenever you see error messages like Connected, no internet access, or something like No internet connection, you need to understand that the router is not at fault. Such messages imply that the connection between the computer and the router is correct, but the problem lies in the internet access. On the contrary, if you see messages like Not connected, no internet or No internet connection, this implies that there is no connection between the computer and the router.
Now that your basics are clear, it is time for you to quickly look at the eight easy steps to fix the issue.
Your Guide To Fixing Such Errors
The following guide presents you with 8 vital steps to follow. Do as directed to fix the error.
Step 1: Are All Other Devices Facing The Same Error?
Before beginning with the troubleshooting, the first precautionary step is to ensure if there are any other devices experiencing the same error. If your Windows computer is connected to Wi-Fi but isn’t getting access to the internet, check whether your phone is also experiencing the same.
Recognizing this is simple. If you have an Android phone in hand, then you will probably see an X icon somewhere over the Wi-Fi icon. iPhone users must go to Settings and check for any No Connection message.
Now, if you find that only your computer is unable to get internet access, then chances are that it is because of any misconfigured setting on the computer. However, if the problem is the same with all devices, then you don’t need to curse your computer. Then, it is just a bad day with a problem with your network equipment.
Step 2: Start By Rebooting Your PC
After you figure out where the problem lies, the next best thing you would have to do is restart your PC. This process clears out the temporary glitches if there are any.
Step 3: Repeat Step 2 With Your Modem And Router
By this, it is meant that you must reboot your modem/ router now. No, you don’t need to start everything all over again. Just pull the power plug from your modem and router. Now, leave them in this condition for two minutes or so, and then start by plugging the modem in first. When the modem boots up, plug in your router. This is the time when your patience is being tested. Hang on tight for a while until the backup starts. Ensure that your modem and router are functioning well.
Step 4: Head Towards Windows Network Troubleshooter
Check whether you are still unable to access the internet. Most of the time, just rebooting your devices is enough for fixing the error. If that doesn’t work, you must turn your eyes towards Windows Network troubleshooter. Most people around you will demotivate you for the step, saying that it won’t work. But hey, it is nothing wrong to give it a try.
To run the network troubleshooter, follow the steps given below.
- Go to Settings>Network and Internet> Status.
- Choose Network Troubleshooter.
For Windows 7,
- Go to Start>Control Panel> Troubleshooting> Network and Internet> Network connections.
Step 5: Have A Look At The IP Address Settings
If none of the tips mentioned above work, then you must ensure that your IP Address is valid. The point is that if your computer’s IP settings aren’t accurate for any reason, then it can lead you to the no-internet access problem.
If you have Windows 10, then look for the network icon in the System Tray and right-click. Now, choose Open Network and Internet settings. Tap on Change adaptor options entry. Now, double click on the connection you are using.
If you have Windows 7, then right-click on the network icon. Now, select Open Network and Sharing Center. Look for your network’s name next to Connections and hit on it.
Now, you would have to click on the Properties button. Look for Internet Protocol Version 4 on the list. Double-click on it. Now, ensure that you have selected Obtain an IP address automatically and Obtain DNS server address automatically. Finally, tap on OK and go online again.
Step 6: Checking The ISP Status
If nothing works well, it would be beneficial if you check if the problem lies in the ISP. For this, use your mobile data and check whether the service provider in your area has reported outages. Make use of apps like DownDetector.
Step 7: Some Commands Might Help
If your connection issue is affecting not one but many devices, then you can skip the step. Otherwise, you must try this out. Try out a few commands in the Command Prompt in Windows. If you have Windows 10, then enter cmd in the Start Menu. Now, right-click on it and select Run as administrator. This will open a Command Prompt window.
In order to reset a few of the files Windows keep for accessing the internet, you must try the following two commands.
netsh winsock reset
netsh int ip reset
In case this doesn’t work, release your computer’s IP address and obtain a fresh one. How? By following the commands below:
Now, refresh the DNS settings of your computer with these commands:
You may have to reboot your PC now.
Step 8: Disabling The Security Software
Probably, some security software might be the reason behind your PC not being able to access the internet. The best you can do here is to disable all the third-party antivirus apps that you might be having. Check if the connection gets back to normal after you disable it.
Source : Access Internet