How to measure the window blinds?
How to measure the window blinds?
When you buy blinds for your home, then question ping you in your mind how to hang them and how to measure window blinds Dubai.
Outside or inside the Mount?
The first choice to make is whether to place the blind within or out of the window frame before you measure the windows. Curtains Dubai and Blinds help you to solve this issue by providing you proper instructions for both options.
Blinds mounted inside the window frame provide a clean appearance.
The headrail will sit back in the window casing on an inside mount, so it will highlight the actual size of the window and allow visibility of your window molding. If you want your blind to suit the window molding flush, you need to make sure you have enough depth in your window to match the width of the headrail (to match flush, each blind style would need a different amount of depth.
But in general, you would need 1 to 4 blinds, and 3 to four for vertical blinds, for blinds going horizontally across your window). Also, you can always mount an inside mount, and the blind will only slightly project from the mounting window if you do not have the required depth.
Blinds attached to the window’s exterior give a longer and wider window the illusion and can cover an attractive window. A blind can be attached either to or above the window molding and beyond on the external mount.
Mounting inside
Measure the distance on top, middle, and bottom inside the window opening. Take the three width measurements narrowest and round down to the 1/8 “nearest.
2. Measure the height from the top of the window to the window sill three times sibez.com inside the opening window. Take the longest of three measurements, measure on the left, in the center. If the blind doesn’t sit on the sill, remove one 1/4 “from the height. If your window doesn’t have a ledge, then calculate to the level that you want the blind to touch.
Weigh diagonal window. When the two diameters are substantially different, an external mount for optimum light and protection of privacy can be ordered. Do not take height or width allowances at all. The factory must make all appropriate benefits for installation and operational clearance on an inside brace.
Mounting outside
Measure the distance you wish the blind to cover from the outermost points. The blind beylikdüzü escort bayan overlaps the opening of the window by at least 1 1/2 “on either side for a minimum of 3” across its entire width to avoid light leakage.
Measure the distance from the top of the blind to the window. The blind will cover the opening window at the top by at least 1-1/2. “Many devices may need more than 1-1/2” above the mounting hardware window.
For exact requirements for a flat vertical surface area, please check product specifications on the desired product. Use the specified amount to calculate the gap above the opening of the vent when the flat vertical surface is 1-1/2. If there is no sill of the window, measure to the point where the blind will touch.