Failure of a hard disk is a serious issue that leads to the loss of the data. Losing data can be very harmful to your business or any other purpose, and once you lose your data, it is almost impossible to recover it until you have a backup of it. This article contains information that will let you know some of the best practices to secure and recover your data. So, let’s get started.
Minimize Access to the Drive
If the hard drive of your device fails, then the first step you should be taking is to minimize the access to the drive because the drive can fail due to various reasons like mechanical failure, bad disk controller, or faulty data cable. Continuous rebooting of drive can spread the problem throughout the drive, which will eventually lead to losing more data or permanent damage to the hard drive. If you face issues like this, make sure that you should get your drive to a professional data recovery service provider.
Never Install Anything
Always remember that you should not be installing any data recovery tool in your failed hard disk because it will cause the overwriting of data that will lead to drive failure. If you want to run a data recovery tool, it should be running on another device so that you can avoid overwriting data and recover it.
Boot From an External Media
Always keep in mind that whenever your hard drive gets damaged, you should boot it from an external media, because damage can be caused due to malware, and booting the infected drive can spread the malware throughout the disk and can infect the whole drive. So, using external media to boot a hard drive is the best way to hold malware’s infection back.
Move Data to a Safe Place
If you manage to recover your data from a damaged hard disk, make sure that you move all the recovered data onto another hard disk. Because the damaged disk is not trustworthy and you can not rely on it, keep moving your data so that you can be sure about the data you have recovered, and if it stops working suddenly, at least you will have the data you had already recovered and moved.
Create a Backup
Creating a backup for your data is one of the most effective ways to keep your information secure. You prepare a backup for all your data regularly on another drive that keeps a copy of all of your data.
If you create a backup of your data before it gets lost, it will save your time and money to recover it.
Disconnect the Device Immediately
Disconnect your device and turn it off immediately in case you face the problem of a hard disk failure, it is the most crucial step you should be taking because once you turn off and stop using the device, the spread of malware or any other issues stop immediately that help you to keep your remaining data safe.
Never Format the Drive
You must keep it in your mind that whatever happens, never format the drive because once you do it, you will never get your data recovered ever. Formatting the drive can repair it, but it will cost you the loss of your whole data.
Never Run Disk Repair (CHKDSK)
CHKDSK detects the soft problems and fixes them. So, if you use it, it will start fixing the issues that can block the memory and overwrite it, which can cost the data to lose.
These are some ways that one should keep in one’s mind to avoid data loss and recover it.
Source : Practices to Recover Data