Computers and Technology

# Free Resistor color code calculator for 10k 1k 100ohm 220 ohm Resistors

In a Color coding technique, the resistor color code calculator is at the resistors frame with the aid of using the use of colorings. The colorings at the resistors frame are referred to as Color bands. All the Color bands at the resistor frame are used to suggest the resistance price and tolerance. Each Color at the resistors frame represents a specific range.

The Color bands of resistors are essentially of 3 types: four band resistor, five band resistor, and six band resistor. In order to locate the resistance of a resistor, we want to decode the Colors painted at the resistors frame. The interpreting modifications primarily based totally upon the range of Color bands painted at the resistors frame.

4 band Color code resistor
A four band Color code resistor has three Color bands on left facet and one Color band on proper facet. The three Color bands on left facet are very near every different. And the 4th Color band on proper facet is separated from first three bands tool with a few area.

A four band Color code resistor has three Color bands on left facet and one Color band on proper facet
You can use the three Color bands at the left facet to suggest the resistors resistance price. And you can also use the 4th Color band at the proper facet shows the tolerance of the resistor.

“Tolerance is the variant withinside the resistance of a resistor from its real resistance. The resistors of excessive tolerance have excessive variant withinside the resistance. The resistors of low tolerance have low variant withinside the resistance. For example, a resistor that has a tolerance of 5% may also range  5% of its resistance from its real resistance price. Similarly, a 8% tolerance of resistor may also range 8% of its resistance from its real resistance price. Tolerance of a 1k resistor color code is generally out in percentage.”

The 1st Color band at the resistor shows the first substantial price or 1st digit of the resistors resistance. And the 2nd Color band shows second substantial price or second digit of the resistors resistance. The third Color band is the decimal multiplier and the 4th Color band shows the resistors tolerance.

The 1st and second Color bands collectively make up a 2 digit range. The third Color band or multiplier is accelerated with this 2 digit range to gain the resistance price of the resistor.

If the 4th Color band or tolerance band is left blank, take to consideration because the three band resistor and the tolerance for the three band resistor will be 20%.

Resistors which are synthetic for navy use may additionally consist of a further band which refers to as fifth band which shows resistor failure fee.

For example, if the Colors on a four band resistor is on this order: brown, Brown, purple and violet (as proven in figure). The values of Color bands might be like this: Brown = 1, Green = five, Red = 102 or 100, Violet = 0.10%.

If the Colors on a four band resistor is on this order: brown, Brown, purple and violet (as proven in figure). For instance, In the Color code table, brown has a price of one that’s the first digit and Brown has a price of five that’s the second one digit. The first and 2nd Color bands are grouped collectively to make up a digit range 15. The third Color band purple has a price of 100. This price is up with the 2 digit range I.e., 15 x 100 = 1500 ohms. Violet specifies that the tolerance is 0.10%.

Therefore, the 1k ohm resistor color code coded with brown-Brown-purple-violet might have a resistance of 1500 ohms with a tolerance of ± 0.10%.

5 band Color code resistor
A five band Color code resistor has four Color bands on left facet and one Color band on proper facet. In other words, The four Color bands on left facet are very near every different and the fifth Color band on proper facet is separated from the primary four bands with a few area.

A five band Color code resistor has four Color bands on left facet and one Color band on proper facet.
The four Color bands at the left facet are grouped collectively to symbolize the resistance price of a resistor and the fifth Color band at the proper facet shows the tolerance of the resistor.

The 1st Color band shows the first substantial price or 1st digit of the resistors price.
The second Color band shows the second substantial price or second digit of the resistor price.
The third Color band shows the third substantial price or third digit of the resistors price.
The 4th Color band is the decimal multiplier.
The fifth Color band shows the resistors tolerance.
The 1st, second and third Color bands collectively make up a three digit range and the 4th Color band or multiplier is accelerated with this three digit range to gain the resistance price of the resistor.

Example:

If the Colors on a five band resistor is on this order: brown, Brown, purple, blue and violet (as proven in figure). The values of Color bands might be like this: Brown = 1, Green = five, Red = 2, blue = 106, Violet = 0.10%.

In the 10k ohm resistor color code table, brown has a price of one that’s the first digit, Brown has a price of five that’s the second one digit and purple has a
In the Color code table, brown has a price of one that’s the first digit, Brown has a price of five that’s the second one digit and purple has a price of two that’s the third digit. The first, 2nd and 1/3 Color bands collectively make up a 3 digit range 152. The 4th Color band blue has a price of 106. This price is accelerated with the 3 digit range 152 I.e., 152 x 106 = 152MΩ. Violet specifies that the tolerance is 0.10%.

Therefore, the resistor Color coded with brown-Brown-purple-blue-violet might have a resistance of 152MΩ with a tolerance of ± 0.10%.

6 band Color code resistor
A 6 band 220 ohm resistor color code resistor includes 6 Color bands. The four Color bands at the left facet are grouped collectively to symbolize the resistors resistance price. The fifth Color band at the proper facet constitute the tolerance of the resistor and the sixth Color band represents the TCR (Temperature Co-green of Resistance).

A 6 band Color code resistor includes 6 Color bands. The four Color band at the left facet are grouped collectively to symbolize.
Firstly, The 1st Color band shows the first substantial price of the resistors price.
Secondly, The second Color band shows the second substantial price of the resistors price.
Thirdly, The third Color band shows the third substantial price of the resistors price.
Consequently, The 4th Color band is the decimal multiplier.
Moreover, The fifth Color band shows the resistors tolerance.
Importantly, The sixth Color band shows the TCR (Temperature Co-green of Resistance).
In conclusion, The 1st, second, and third Color bands collectively make up a three digit range. And the fourth Color band is accelerated with this three digit range to get the resistance price of the resistor.

Example:

If the Colors on a 6 band resistor is on this order: Brown, brown, violet, black, gold and orange. The values of Color bands might be like this: Green = five, Brown = 1, Violet = 7, Black = 100, Gold = five%, Orange = 15ppm.

In the Color code table, Brown has a price of five that’s the first digit. However, brown has a price of one that’s the second one digit
As a result, In the Color code table, Brown has a price of five that’s the first digit, brown has a price of one that’s the second one digit and violet has a price of seven that’s the third digit. The first, 2nd and 1/3 Color bands collectively make up a 3 digit range 517. The 4th Color band black has a price of 100. This price is accelerated with the 3 digit range 517 I.e., 517 x 100 = 517 ohms. Gold specifies that the tolerance is five% and orange specifies that the TCR is 15ppm.

Therefore, a resistor is coded with Brown-brown-violet-black-gold-orange. And it might have a resistance of 517 ohms with a tolerance of five% and TCR of 15ppm.

What is TCR? The fee at which the resistance of the resistor modifications with alternate in temperature is referred to as TCR (Temperature Co-green of Resistance).

How to examine or decode resistor Color codes
The placement of the Color bands at the resistor could be very important. Generally, the Color bands located closest to the lead or stop of the resistor is taken into consideration because the first band. The subsequent to the primary band is 2nd band and so on. Another manner is the greater area among the 2 bands (third and 4th bands) additionally shows the analyzing direction.

### harpersophia

I am Harper Sophia, working in a company Utmel, which is the one of the best world Electronic Component distributors with over 100,000 different kinds of electronic components.