Unable to Verify the Printer On Your Network

Is your printer not executing the printing jobs? Are you unable to verify the printer on your network? Well! This guide can help you. There could be a number of possible reasons due to which this problem may occur. Fortunately, there are some simple troubleshooting steps that can help you to deal with this issue. In this post, we are going to share the simple step by step guidelines to fix the problem. So, read on and fix the simple instructions to troubleshoot the concern.



I am unable to verify the printer. What should I Do?

If you have sent the printing job to your device over the network, but the job is unable to execute or the job is not being handled by the printer, follow the steps below. These steps will help you to mitigate the concern and make sure that you can print the document without any hassle:

Check and make sure that your printing device is turned on and in the ‘Ready State’. Also, the Ethernet cable should be connected properly.

When you have turned on the printer and inserted the ‘Ethernet Cable’ properly, you need to check and make sure that ‘NIC’ lights are turned on and showing the ‘Communication’. Not every model supports the NIC lights and if your printer also does not support it, you can continue with step 8.

The ‘Top Amber’ light must be turned on and remain ‘solid’. Also, the bottom green light must flash ‘On and Off’.

If the NIC lights are showing right, you can proceed with step 8. But, if not, you need to try using the other ‘Ethernet Cable’.

If the Ethernet cable is not helping you to fix the concern, you need to check the Network and make sure that it is active and working fine.

You can detach the Ethernet cable from the backside of your computer, and insert it to the printer’s internet port. After that, verify the “NIC” lights to make sure that they are displaying correctly.

If the NIC lights are showing fine, connected Ethernet cable and the printing device is in the ‘Ready’ mode, you need to take a print out of the Settings page for the verification of IP address.

You can try setting the IP address of your printer to static. For this, you can refer to the user guide of your printer.

Important: Do not forget to check the computer you are using to print the document. Make sure your device is working fine and connected to the network. If your device is not connected, you won’t be able to print the documents over the network. Check the computer and then try to print the documents. You must be able to print the test page. And, after that, you should be able to print the documents over the network. To get these instructions, you can refer to the Windows manual.

That’S All! With these simple guidelines, you can fix the Unable to Verify the Printer On Your Network problem on your device. So, follow the guidelines and fix your problem.

We hope that after following these simple steps, you will be able to print the documents over the network. All the mentioned guidelines are simple. But, if you still have a doubt or there is any other query regarding the printer connectivity over the network. Get in touch with the experts. The professionals can give you the best advice and make sure that nothing compromises your printer experience. Experts are available 24/7 to help you which means you can contact them any time at your convenience.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button